Ubiquiti Networks
Ubiquiti UDB-Pro-US UniFi Device Bridge Pro US
MPN: UDB-PRO-US
SKU: UBI-UDB-PRO-US
$199
Share
Dimensions | Ø189.5 x 64.3 mm (Ø7.4 x 2.5") |
Weight | Without mount: 431 g (1 lb) |
With mount | 515 g (1.1 lb) |
Enclosure material | UV-resistant polycarbonate |
Mount material | UV-stabilized polycarbonate, stainless steel |
Pole mount diameter | 20–53.1 mm (0.8–2.1") on pipe outer diameter |
Wind loading | 69 N at 200 km/h (15.5 lbf at 125 mph) |
Weatherproofing | IPX6 |
Hardware | |
Networking interface | (2) GbE RJ45 ports |
Management interface | Ethernet WiFi |
PoE interface | (1) PoE in (PoE output not used) (1) Passive PoE output |
Power method | PoE PoE+ (Required for PoE output) |
Power supply | UniFi PoE switch 48V, 0.32A PoE adapter (Included) |
Supported volatage range | 42.5–57V DC |
Max. power consumption | 9W |
Max. TX power 2.4 GHz 5 GHz 6 GHz | – 25 dBm – |
Max. data rate 2.4 GHz 5 GHz 6 GHz | – 867 Mbps (BW80) – |
MIMO 2.4 GHz 5 GHz 6 GHz | – 2 x 2 – |
Antenna gain 2.4 GHz 5 GHz 6 GHz | – 19 dBi – |
Antenna | Internal |
Range | 5+ km |
LEDs | Power, Ethernet, (4) signal strength |
Button | |
Factory reset | |
Mounting | Pole (Included) |
Ambient operating temperature | -40 to 60° C (-40 to 140° F) |
Ambient operating humidity | 5 to 95% noncondensing |
Certifications | CE, FCC, IC |
Software | |
WiFi standards | 802.11a/n/ac |
Wireless security | WPA2 AES (Always On) |
Operating frequency* US/CA | U-NII-1 5150 - 5250 MHz U-NII-2A 5250 - 5350 MHz U-NII-2C 5470 - 5725 MHz U-NII-3 5725 - 5850 MHz |
Worldwide | 5150 - 5875 MHz *Depends on regulatory region. |
Channel bandwidth | 20/40/80 MHz |
Max. conducted TX power | 25 dBm (Combined) |
Modulation | BPSK (½), QPSK (½), QPSK (¾), 16QAM (½), 16QAM (¾), 64QAM (2⁄3), 64QAM (¾), 64QAM (5⁄6), 256QAM (¾), 256QAM (5⁄6) |