Planet Technology
Planet GT-805A 10/100/1000Base-T to miniGBIC SFP Converter
MPN: GT-805A
SKU: PLA-GT-805A
Share
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.
Distance Extension with High Performance and Steady Network Communications
PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below:
|
Optic Mode |
Connector Type |
Distance |
|
Multi-mode |
Duplex LC/SC |
220m/550m/2km |
|
Single mode |
Duplex LC/SC |
20/40/60/80/120km |
|
Single mode WDM |
Simplex LC/SC |
20/40/60/80km |
Enhanced Smart Management Features
The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function.
- LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission.
- LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission.
Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network.
Easy Installation
The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss.
| Interface | |
|---|---|
| Version | 2 |
| Copper Port | 10/100/1000BASE-T Ethernet TP interface Auto-negotiation, auto MDI/MDI-X with PoE injector function |
| SFP Port | GTP-802: 1000BASE-X SFP interfaces GTP-802S: 1000BASE-X SFP interfaces GTP-805A: 100/1000BASE-X SFP interfaces |
| Fiber Mode | GTP-802 Multi-mode: 50/125 ㎛ or 62.5/125 ㎛ optic fiber GTP-802S Single-mode: 9/125 ㎛ optic fiber GTP-805A May vary on SFP Module |
| Fiber Port Type (connector) | GTP-802: SC GTP-802S: SC GTP-805A: SFP |
| Cable Distance | GTP-802: 220m & 550m GTP-802S: 10km GTP-805A: May vary on SFP Module |
| Optical Frequency | GTP-802: 850nm GTP-802S: 1310nm GTP-805A: May vary on SFP Module |
| Launch Power (dBm) | GTP-802: Max. -4 Min. -9.5 GTP-802S: Max. -3 Min. -9.5 GTP-805A: May vary on SFP Module |
| Receive Sensitivity | GTP-802: -13.5 GTP-802S: -14.4 GTP-805A: May vary on SFP Module |
| Maximum Input Power | GTP-802: -18 GTP-802S: -20 GTP-805A: May vary on SFP Module |
| Power Over Ethernet | |
| PoE Output | IEEE 802.3af Power over Ethernet standard IEEE 802.3at Power over Ethernet enhancements standard |
| Power Output | PoE 52V DC, max. 30 watts |
| PoE Power Supply Type | Mid-span |
| Power Pin Assignment | 4/5 (+), 7/8 (-) |
| PoE Power Budget | 30 watts |
| Hardware Specifications | |
| Switch Architecture | Store-and-Forward |
| Flow Control | Back pressure for half duplex mode IEEE 802.3x pause frame for full duplex mode |
| Maximum Frame Size | 9K |
| LED | System: PWR Fiber 100/1000BASE-X: LNK / ACT (GTP-805A) Fiber 1000BASE-X: LNK / ACT (GTP-802/GTP-802S) TP 10/100/1000BASE-T: LNK / ACT PoE: Power-in-use |
| Dimensions (W x D x H) | 70 x 94 x 26 mm |
| Weight | 0.21kg |
| Power Supply | 52V DC, 0.58A external AC-to-DC adapter |
| LFP mode | Enable: Shut down either TP port or fiber port that is broken Disable: Link LED indicators still on if connection of the other end is broken |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Protocols and Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet. IEEE 802.3at Power over Ethernet enhancements standard |
| Cables | TP: Cat 5 / 5e / 6 UTP cable Fiber: Multi-mode: 50/125 ㎛ or 62.5/125 ㎛ optic fiber Single-mode: 9/125 ㎛ optic fiber |
| Environment | |
| Temperature | 0~50 degrees C |
| Humidity | 5~90% (non-condensing) |