Mikrotik

MikroTik RB912UAG-5HPnD-OUT BaseBox 5 5GHz 2x2 MIMO 1000mW 802.11a/n Outdoor Access Point, 2xRPSMA connectors

MPN: RB912UAG-5HPnD-OUT

SKU: MIK-RB912UAG5HPNDOUT

$89
Availability Available 4 in stock.
Description

The BaseBox in an outdoor wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.


The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.


Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.


Box contains: RB912 outdoor unit, 24V 0.8A power adapter, gigabit PoE injector, mounting loop, DIN rail mount.





































































































































Product specifications


Product code RB912UAG-5HPnD-OUT
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
Architecture MIPS-BE
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 1
MiniPCI slots 0
MiniPCI-e slots 1
Wireless chip model AR9342-BL1A
Wireless standards 802.11a/n
Number of USB ports 1
Power Jack Yes
802.3af support No
PoE 8-30V DC
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor No
Dimensions 246x135x50mm
Operating System RouterOS
Temperature range -30°C to +60°C
License level L4
Current Monitor No
TX power 30dBm
CPU AR9342-BL1A
Max Power consumption 14W at 24v
SFP ports 0
USB slot type USB type A
Number of chains 2
Storage type NAND
Storage size 64 MB

Wireless specifications






































5 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 30 -96 1000
54MBit/s 27 -78 501
MCS0 30 -96 1000
MCS7 26 -75 398

wireless parameters may be limited in software, depending on your local regulatory limitations


Ethernet test results










































































RB912UAG-5HPnD-OUT AR9342 1G 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.0 983.7 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 81.0 983.7 86.0 352.3 87.6 44.9
Routing none (fast path) 81.0 983.7 210.0 860.2 226.9 116.2
Routing 25 simple queues 81.0 983.7 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0


  • All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)

  • Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes

  • Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out

  • Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results