MikroTik RBGrooveA-52HPn, 600MHz CPU, RouterOS Level 4, 802.11a/b/g/n, 500mW Output Power

Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! GrooveA has 64MB of RAM and RouterOS license (support for AP, point-to-point or CPE)

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz).

Wireless specifications

wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

• All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)

• Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes

• Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out

• Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results